Home » Products » Float Glass Manufacturing Equipment and Technology » Longitudinal Glass Cutting Machine

Longitudinal Glass Cutting Machine

Longitudinal Glass Cutting Machine

Longitudinal Glass Cutting Machine

Technical Parameters of Longitudinal Glass Cutting Machine

Quantity of Cutter Bits 5 cutters on both of upper side and lower side
Cutting precision ≤±1.0mm
Cutting Pressure range 10-100N
Moving speed 2m/ min

Outstanding Features of Longitudinal Glass Cutting Machine:
Our longitudinal glass cross cutting machine has ten cutters totally. There are 5 cutters on its both sides.
The edge can be cut again and the minimum distance between two edge cutters is 80mm.
Distance between cutters can be set and adjusted by manual, and the glass width can be digital displayed directly.
Five cutters on each side can be moved manually or automatically, so as to track the swing. If the swinging extent exceeds the setting range, the spared cutter will automatically shift to the relevant position and then coordinate with the cross cutting machine, making the tool change point locating at cut marks of cross cutting machine.
When it is needed to replace the cutting wheel on one side, the system will automatically coordinate with the signal of cross cutting machine and the switching point will locate at the cross cutting score.
The cutting pressure of our longitudinal glass cross cutting machine can be adjusted and displayed independently or regulated uniformly to meet various requirements on cutting glass with different thickness.

Feedback Form